
Openers, remotes, keypads and sensors
Opener humming, clicking or ignoring the remote? Call anytime to reach a Longmont opener technician.
The opener is the part of the garage door you touch every day, so it is the part people notice first when something goes wrong. A remote that only works from the driveway, a keypad that stopped responding, an opener that hums without moving or a door that starts down and then reverses are all common requests in Longmont.
Before blaming the opener, it helps to know that it does not lift the door by itself. The springs carry the weight. If the door is hard to move by hand with the opener disconnected, the problem is the springs or tracks, and a new opener won't fix it. A technician checks the door's balance first for exactly that reason.
Residential openers made on or after January 1, 1993 must meet the federal entrapment protection standard at 16 CFR Part 1211. Since a 2016 update, the opener must also check a secondary device such as photo-eye sensors on every close. If your opener predates 1993, has no photo-eye sensors, or needs a major part that costs close to a new unit, replacement is usually the better choice.
Newer openers also bring features that suit Longmont households: quieter belt drives for garages under bedrooms, battery backup so the door still works when the power goes out, and smartphone control. Wall-mounted jackshaft openers free up ceiling space in garages with storage racks or high ceilings.
Once a month, place a piece of 2x4 lumber flat on the floor under the door and close it. The door should reverse when it touches the wood. Then wave something through the sensor beam as the door closes; it should reverse again. If either test fails, stop using the automatic opener until it is fixed.

Requests cover repairs to existing openers and full replacements.
Gears, logic boards, limit and force settings.
Photo-eyes cleaned, aligned and rewired.
New or replacement remotes and keypads set up.
Chain, belt and wall-mount openers installed and tested.
Upgrades for power outages and phone access.
A new opener won't fix a bad spring, so balance is tested first.
Ask for both prices when an opener is older.
Ask for the auto-reverse and sensor test after any opener work.

Opener trouble in Longmont? Call or send the form.
Free — no obligations
Try fresh remote batteries and wipe both sensor lenses.
Tell us the opener type if you know it and what it is doing.
The technician checks the door's balance before working on the opener.
You get a price for repair and, when it makes sense, a replacement option.

That is the safety reverse doing its job. The usual cause is a dirty, blocked or misaligned photo-eye sensor. If cleaning and lining up the sensors doesn't help, the close force or limit setting may need adjusting.
If the opener is newer and the part is inexpensive, yes. If it predates photo-eye sensors or the repair costs close to a new unit, replacement is usually the better value.
Belt-drive and wall-mounted jackshaft openers are generally much quieter than chain drives, which matters if a bedroom sits above or beside the garage.
Yes. Many current openers offer battery backup so the door can still open and close during a power outage.